Launch TLT-240SCS
Two-post elevator with upper synchronization, 4 tons (European CE certification). Asymmetrical legs. Increased column profile thickness (6 mm), increased diameters of pulleys and cables (9 mm). Stopper control from one column.
Подробное описаниеПреимущества и специальные предложения
Launch TLT-240SCS two-post electrohydraulic lifter with top synchronization, lifting capacity of 4 tons (European CE certification). Suitable for servicing passenger cars, SUVs and standard vans. Unlocking by a lever mounted on a single column. Both locking mechanisms - on both columns - are released via a protected cable drive. Reinforced design of the elevator elements, pulleys of increased diameter. The thickness of the metal of the stand profile is 6 mm. Protection elements in the basic delivery set (hydraulic parachute valves, protection of moving mechanisms, protective frames on the grip legs). Lift height from 110 mm (two-section screw adjustment to increase the lift height). Maximum lifting height up to 1920 mm.
Default tine configuration: 2-section tines with a range of 800-120 mm. Tines in other configurations can be installed as an option.
Technical Specifications
|
Load capacity: |
4 tons (CE certification) |
|
Elevation: |
1920 mm |
|
Time to climb to maximum height: |
≤ 50 sec |
|
Lowering time: |
20—40 sec (adjustable) |
|
Width of the opening for the passage of cars: |
2486 mm |
|
Minimum height of pick-ups from the floor: |
110 mm |
|
Overall dimensions: |
height: 3840 mm, width: 3420 mm |
|
Noise level: |
up to 80 dB |
|
Compressor operating pressure: |
18 MPa |
|
Motor parameters: |
three-phase - 380V/50Hz 2.2kW |
Dimensions
With symmetrical installation
With asymmetrical installation
Installation dimensions
Symmetrical installation
Asymmetrical installation
Equipment
|
Lift arm drive |
1 pc. |
|
Lift arm guide |
1 pc. |
|
Hydraulic power plant |
1 pc. |
|
Double gangway |
1 pc. |
|
Two-piece tines |
4 pc. |
|
Synchronization cable |
2 pc. |
|
Rack protection kit (rubber cover) |
2 pc. |
|
Fastener and fitting set |
1 pc. |
|
Wiring and hydraulic hoses and fittings |
1 pc. |
|
Lever-operated stopper control system |
1 pc. |
Принадлежности из комплекта поставки
Сопутствующие услуги
Дополнения
Проставка (удлинитель подхвата) для TLT-235/240, увеличение подъема на 90 мм
Проставка-удлинитель
Карман для хранения документов. Крепление на двусторонний скотч или магнитную ленту.
Стойка гидравлическая, г/п 500 кг.
Базовая диагностика и сервисные функции
30 светодиодов - 2250 Люкс, 50 см/55 Люмен
Подключение 3/8″, длина 15 м, внешний диаметр шланга 16 мм, внутренний —10 мм
Стойка трансмиссионная механическая, 0,6 т.
Укомплектуйте пост
Верстак слесарный 2-х тумбовый, 7 ящиков, столешница Zn, защитный экран MaxPlus
Верстак слесарный 3-х тумбовый, 2 створки, столешница Zn
Тележка инструментальная на 7 ящиков с широким ассортиментом опциональных аксессуаров и дополнительных навесных полок
Все комплектации
| Стоимость | Наличие | Тоннаж | Высота |
|
|
4 | 3840 mm | |
|
|
4 | 3840 mm | |
|
|
4 | 4150 mm | |
|
|
4 | 3840 mm | |
|
|
4 | 4150 mm |