Преимущества и специальные предложения
Two-post elevator Launch TLT-240SB for servicing passenger cars (including large SUVs) and vans. Simple and reliable control of stoppers (separate, cables on carriages). Universal pick-up legs (length of the front ones - up to 1120 mm, rear ones - 1365 mm). Double safety ladder. Reinforced design of the elevator elements, pulleys of increased diameter. The thickness of the metal of the column profile - 6 mm (20-25% more in comparison with most similar manufacturers) - gives special rigidity and stability of the elevator columns. Protection elements in the basic delivery set (hydraulic parachute valves, protection of moving mechanisms, protective frames on the grip legs). Lifting height from 110 mm (two-section screw adjustment to increase the lifting height). Maximum lifting height up to 1920 mm. Professional H-shaped carriage form factor.
Technical specifications
| Elevation: | 1920 mm |
| Time to climb to maximum height: | ≤ 50 sec |
| Lowering time (adjustable): | 20 — 40 sec |
| Width of passage between carriages: | 2486 mm |
| Minimum height of pick-ups from the floor: | 110 mm |
| Noise level: | up to 75 dB |
| Motor parameters | 220 V / 50 Hz 2.2 kW |
| Cargo dimensions for shipping calculations: | TLT-235SB | TLT-240SB | TLT-235SBA | TLT-240SBA |
| Total weight: | 610 kg | 660 kg | 660 kg | 680 kg |
| Seat 1 (m): | 2.9 × 0.55 × 0.66 | 2.9 × 0.55 × 0.66 | 2.9 × 0.55 × 0.66 | 2.9 × 0.55 × 0.66 |
| Seat 2 (m): | 0.23 × 0.3 × 0.85 | 0.23 × 0.3 × 0.85 | 0.87 × 0.375 × 0.53 | 0.87 × 0.375 × 0.53 |
| Cumulative volume: | 1.11 m³ | 1.11 m³ | 1.22 m³ | 1.22 m³ |
| Features: | TLT-235SB | TLT-240SB | TLT-235SBA | TLT-240SBA |
| Load capacity according to European CE certification: | 3.5 т | 4 т | 3.5 т | 4 т |
| Stopper Control: | cable | cable | Electric actuator with remote control | Electric actuator with remote control |
| Hydropower Plant Location: | Bottom of the column | Bottom of the column | Upper part of the column | Upper part of the column |
| Compressor operating pressure: | 16 MPa | 18 MPa | 16 MPa | 18 MPa |
Dimensions
Installation dimensions
Equipment
|
Lift arm drive |
1 pc. |
|
Lift arm guide |
1 pc. |
|
Hydraulic power plant |
1 pc. |
|
Double gangway |
1 pc. |
|
Two-piece tines |
4 pc. |
|
Three-piece tines |
2 pc. |
|
Synchronization cable |
2 pc. |
|
Rack protection kit (rubber cover) |
2 pc. |
|
Fastener and fitting set |
1 pc. |
|
Wiring and hydraulic hoses and fittings |
1 pc. |
Принадлежности из комплекта поставки
Сопутствующие услуги
Дополнения
Проставка (удлинитель подхвата) для TLT-235/240, увеличение подъема на 90 мм
Проставка-удлинитель
Карман для хранения документов. Крепление на двусторонний скотч или магнитную ленту.
Стойка гидравлическая, г/п 500 кг.
Базовая диагностика и сервисные функции
30 светодиодов - 2250 Люкс, 50 см/55 Люмен
Подключение 3/8″, длина 15 м, внешний диаметр шланга 16 мм, внутренний —10 мм
Стойка трансмиссионная механическая, 0,6 т.
Укомплектуйте пост
Верстак слесарный 2-х тумбовый, 7 ящиков, столешница Zn, защитный экран MaxPlus
Верстак слесарный 3-х тумбовый, 2 створки, столешница Zn
Тележка инструментальная на 7 ящиков с широким ассортиментом опциональных аксессуаров и дополнительных навесных полок
Все комплектации
| Стоимость | Наличие | Тоннаж | Питание, В |
|
|
3.5 | ||
|
|
3.5 | 220 | |
|
|
3.5 | ||
|
|
3.5 | 220 | |
|
|
3.5 | ||
|
|
4 | ||
|
|
4 | ||
|
|
4 |